Metal welding leader

Language

Home page

Medium frequency inverter spot welder working conditions [DCS08]

Dec 22,2023

The working surrounding of medium frequency inverter spot welding machine should have no gas, vapor, chemical deposition, dirt, mold and other explosive and corrosive media that seriously affect the use of the equipment, and there is no severe vibration and turbulence.

DCS08 spot welder side view

As for the water-cooled welding machine, the temperature range of the inlet cooling water is +5 to +30°C. The cooling water pressure should be able to ensure the necessary flow of the welding machine, and the water quality should meet the industrial water standards.

As for welders with naturally cooled air, the maximum temperature of the surrounding air should not be higher than 40°C. The average maximum relative humidity in the wettest months should not exceed 90%.

Nov 13,2026

What series of quality symptoms does a locating fault trigger in automated projection welding on a flexible projection welding workstation?

Nov 12,2026

What chain reactions does the incoming condition of the wire harness cause in ultrasonic wire harness terminal welding?

Nov 12,2026

Which details in daily use of a servo-controlled capacitor discharge spot welder shorten capacitor service life?

Nov 12,2026

What effects may indentations on the foil surface have on finished product performance when welding multi-layer laminated flexible connections on a polymer diffusion welding machine?

Nov 11,2026

What seam defects may rust and impurities on the plate surface bring when welding stainless steel shells on a medium frequency longitudinal seam welding machine?

Nov 11,2026

If the wall thickness of copper tubes deviates when sealing copper tubes on an ultrasonic tube sealing machine, what sealing problems may it cause?